Changsha Jian-Yi New Material Co., Ltd.
Make the project safer and the environment better!
Add to Cart
Long Fiber Geotextile For Beach Embankment And Harbor Pier Reinforcement
Product Introduction
Long fiber geotextile is a geosynthetic material made directly from polyester by spinning and needle consolidation. Product specifications can be selected from 100-800g/m², and the fibers are arranged into a three-dimensional structure. It has good mechanical function, good water permeability, and can resist corrosion, anti-aging. In addition, it can also adapt to the uneven base, resist the damage of external construction force, creep becomes smaller, and can maintain the original function even under long-term load.
Product Properties
Good mechanical function, water permeability, corrosion resistance, aging resistance, and can adapt to uneven base, resist construction external force damage, creep becomes smaller, even under long-term load can still maintain the original function.
Product Application
Long fiber geotextile has been widely used in many fields. In water conservancy projects, it can be used for dam and slope protection filtration, channel isolation, seepage prevention. It also plays an important role in the foundation isolation, anti-filtration, drainage, soil slope, retaining wall, pavement reinforcement and drainage of roads, railways and airport runways. In addition, it is also suitable for the soft foundation treatment of port engineering, beach embankment, harbor pier and breakwater reinforcement, drainage and so on.
Product Specification
* Grams/㎡: 100g~800g/㎡
* Width: 1.0m~6.60m
* Roll length: 50m~200m (customized request accept)
PS: Customized request accept for all above.
Product Specification and Technical Index(GB/T 17639—2023)
Item
| Index
| ||||||||||
| Nominal strength/(KN/m) | |||||||||||
| 6 | 9 | 12 | 18 | 24 | 30 | 36 | 48 | 54 | |||
| 1.00 | Longitudinal And Transverse Tensile Strength(KN/m≥) | 6.0 | 9.0 | 12.0 | 18.0 | 24.0 | 30.0 | 36.0 | 48.0 | 54.0 | |
| 2.00 | Elongation Under Maximum Load In Vertical And Horizontal Direction(%) | 30~80 | |||||||||
| 3.00 | CBR Burst Strength ( KN≥) | 0.9 | 1.6 | 1.9 | 2.9 | 3.9 | 5.3 | 6.4 | 7.9 | 8.5 | |
| 4.00 | Tearing Strength (KN,≥,LD/TD) | 0.15 | 0.22 | 0.29 | 0.43 | 0.57 | 0.71 | 0.83 | 1.10 | 1.25 | |
| 5.00 | Sieve SizeO90,O95 (mm) | 0.05~0.30 | |||||||||
| 6.00 | Vertical Permeability Coefficient (cm/s) | Kx(10ˉ1-10ˉ3) K=1.00-9.90 | |||||||||
| 7.00 | Width Variation (％≥) | -0.5 | |||||||||
| 8.00 | Weight Variation (%≥) | -5 | |||||||||
| 9.00 | Thickness Deviation Rate(%≥) | -10 | |||||||||
| 10.00 | Coefficient Of Thickness Variation(%≤) | 10 | |||||||||
| 11.00 | Dynamic Punch | Hole Diameter(mm≤) | 37.0 | 33.0 | 27.0 | 20.0 | 17.0 | 14.0 | 11.0 | 9.0 | 7.0 |
| 12.00 | Longitudinal And Transverse Breaking Strength(KN)≥ | 0.3 | 0.5 | 0.7 | 1.1 | 1.4 | 1.9 | 2.4 | 3.0 | 3.5 | |
| 13.00 | Uv resistance (Xenon Arc Lamp Method) | Vertical And Horizontal Strength Retention(%≥) | 70 | ||||||||
| 14.00 | Uv resistance (Fluorescent UV Lamp Method) | Vertical And Horizontal Strength Retention(%≥) | 80 | ||||||||